English
52
Secure the template to the workpiece. Feed the trimmer
in the manner that the template guide moves along the
template as shown in
Fig. 19
.
<Trimmer guide>
The guide is handy when used in processing of materials such
as trimming and beveling of plywood.
(1) Fit the trimmer guide on the base ass’y with knob bolt (B).
(2) Loosen knob bolt (B) to move the trimmer guide up and down.
(3) Loosen knob bolt (C) and turn the stop screw to move the
guide pin. (
Fig. 20
)
After moving the guide pin, tighten knob bolt (C) to secure it.
(4) As shown in
Fig. 21
, securely attach the bottom of the base
ass’y to processed surface of the materials. Feed the trimmer
with the guide pin alongside the material.
Fig. 20
Stop screw
Washer (A)
Knob bolt (C)
Knob bolt (B)
Guide pin
Trimmer guide
Fig. 21
Body feed direction
Trimmer guide
<Straight guide>
○
It is handy when used for linear processing work
such as beveling, grooving and the like.
(1) Fit the straight guide with knob bolt (B) on the
base ass’y and
fi
x it.
(2) Adjust the length “C” from the bit to the surface
of straight guide by loosening the wing nut and
moving the straight guide as necessary. (
Fig. 22
)
Fig. 19
Template
Fig. 22
Straight guide
Knob bolt (B)
Bolt
Wing nut
Loosen
Wing nut
Guide holder
Knob bolt (B)
Washer (A)
Tighten
Straight guide
C
00Book̲M1808DA̲ChS.indb 52
00Book̲M1808DA̲ChS.indb 52
2021/12/01 14:42:46
2021/12/01 14:42:46
