9
English
NAMES OF PARTS
(
Fig. 1
–
Fig. 12
)
Firing head (outlet)
Rod
LED light
Trigger
Hook
Battery
Latch
Battery cover
Terminals
Ventilation holes
Charger
Nail head
Nail shaft
Nail tip
Magnet
Magnetized area
Nail
Driver unit
Metal joint
Hole
Screw
Groove
Pliers
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
NH18DSL: Cordless Auto Hammer
To reduce the risk of injury, user must read
instruction manual
Operators and others in work area must wear
safety glasses with side shields.
Never point tool at yourself or others in work
area.
Disconnect the battery
Do not use on sca
ff
oldings, ladders.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Direct current
kg
Weight
(According to EPTA-Procedure 01/2014)
Ϩ
Switching ON
Switching OFF
Warning
Prohibited action
SPECIFICATIONS
1. Cordless Auto Hammer
Model
NH18DSL
Voltage
18 V
Number of blows
4000 min
-1
Applicable Nail
ø1.7 – 4.1 mm (See
Table 1
)*
1
Applicable Nail Length
25 mm to 90 mm*
1
Weight*
2
1.3–1.9 kg
Dimension
Height × Length
135 mm × 285 mm (BSL1815)
*1: Opposing Wood: SPF, Cedar
May not be able to fully drive a nail into hard materials such as hemlock spruce, MDF or laminated lumber.
*2: Weight: According to EPTA-Procedure 01/2014. Depending on attached battery. The heaviest weight is measured with
BSL36B18 (sold separately).
NOTE
Due to HiKOKI’s continuing program of research and development, the speci
fi
cations herein are subject to change
without prior notice.
0000Book̲NH18DSL̲EU.indb 9
0000Book̲NH18DSL̲EU.indb 9
2021/02/12 13:50:19
2021/02/12 13:50:19
