background image

English

28

  Before storing a battery, remove any swarf and dust that may adhere to it and do 

not store it together with metal parts (screws, nails, etc.).

2.  Do not pierce battery with a sharp object such as a nail, strike with a hammer, step 

on, throw or subject the battery to severe physical shock.

3.  Do not use an apparently damaged or deformed battery.

4.  Do not use the battery for a purpose other than those speci

fi

 ed.

5.  If the battery charging fails to complete even when a speci

fi

 ed recharging time has 

elapsed, immediately stop further recharging.

6.  Do not put or subject the battery to high temperatures or high pressure such as 

into a microwave oven, dryer, or high pressure container.

7.  Keep away from 

fi

 re immediately when leakage or foul odor are detected.

8.  Do not use in a location where strong static electricity generates.

9.  If there is battery leakage, foul odor, heat generated, discolored or deformed, or in 

any way appears abnormal during use, recharging or storage, immediately remove 

it from the equipment or battery charger, and stop use.

10.  Do not immerse the battery or allow any 

fl

 uids to 

fl

 ow inside. Conductive liquid 

ingress, such as water, can cause damage resulting in 

fi

 re or explosion. Store your 

battery in a cool, dry place, away from combustible and 

fl

 ammable items. Corrosive 

gas atmospheres must be avoided.

CAUTION

1.  If liquid leaking from the battery gets into your eyes, do not rub your eyes and wash 

them well with fresh clean water such as tap water and contact a doctor immediately.

 

If left untreated, the liquid may cause eye-problems.

2.  If liquid leaks onto your skin or clothes, wash well with clean water such as tap 

water immediately.

 

There is a possibility that this can cause skin irritation.

3. If 

you 

fi

 nd rust, foul odor, overheating, discolor, deformation, and/or other 

irregularities when using the battery for the 

fi

 rst time, do not use and return it to 

your supplier or vendor.

WARNING

If a conductive foreign matter enters in the terminal 

of lithium ion battery, the battery may be shorted, 

causing 

fi

 re.  When storing the lithium ion battery, 

obey surely the rules of following contents.

  Do not place conductive debris, nail and 

wires such as iron wire and copper wire in the 

storage case.

  To prevent shorting from occurring, load the 

battery in the tool or insert securely the battery 

cover for storing until the ventilator is not seen 

(See Fig. 1).

 Fig. 1

Battery

Ventilation holes Terminals

Battery 

cover

Latch

000Book̲SV1813DA̲ChS.indb   28

000Book̲SV1813DA̲ChS.indb   28

2022/02/16   10:21:46

2022/02/16   10:21:46

Summary of Contents for SV 1813DA













































Reviews: