English
36
4. Attaching and Removing the dust bag (
Fig. 9
)
(1) Attaching the dust bag
Insert the dust bag into the duct on the body of
the power tool.
(2) Removing the dust bag
Hold the duct, and pull out the dust bag.
WARNING
Prior to the sanding operation, make sure
the material of surface you are going to
sand.
If the surface under sanding operation is
expected to generate harmful / toxic dusts such as lead painted surface, make sure
the dust bag or appropriate dust extraction system is connected with dust outlet
tightly.
Wear the dust mask additionally, if available.
Do not inhale or touch the harmful / toxic dusts generated in sanding operation, the
dust can endanger the health of yourself and bystanders.
CAUTION
If too much dust accumulates in the dust bag, the dust collection power will be
reduced. Dispose of dust as soon as possible.
5. Adjustment of speed
The sander is equipped with an electric control circuit
that enables speed control. To adjust the speed,
turn the dial shown in
Fig. 10
. When the dial is set
to “1”, the sander operates at the minimum speed
(7000 min). When the dial set to “6”, the sander
operates at the maximum speed (11000 min). Adjust
the speed according to the material to be cut and
working e
ffi
ciency.
Fig. 9
Dust bag
Duct
Insert all the way
Fig. 10
Dial
000Book̲SV1813DA̲ChS.indb 36
000Book̲SV1813DA̲ChS.indb 36
2022/02/16 10:21:47
2022/02/16 10:21:47
