English
39
●
Never run the tool without the sanding paper. You may seriously damage the pad.
●
Using the tool with the pad edge contacting the workpiece may damage the pad.
NOTE
Movement of the sander may tend to become unsteady after new sanding paper has been
installed, because of the new, coarse grain of the paper. This can be avoided by slightly
tilting the sander forward or backward during sanding or polishing. Sander movement will
become steady as the sanding paper surface becomes properly abraded.
HOW TO INSTALL THE SELECTING ACCESSORIES
WARNING
To avoid serious accident, ensure the
switch is in the OFF position, and pull
out the battery.
Installing the polyester bu
ff
or the
polishing sponge.
Since the attachment is a hook-and-
loop type as with the sanding paper, the
polyester bu
ff
or the polishing sponge
can be mounted by just pressing it onto
the pad (
Fig. 14
).
ATTACHING THE DUST COLLECTOR
External extraction system:
Connect a suitable extraction device.
Use a suction hose with vacuum adapter (A) or (B) if necessary.
Inner diameter 35 mm
Inner diameter 32 mm
Inner diameter 38 mm
Inner diameter 28 mm
Hose
Vacuum adapter (A)
Vacuum adapter (B)
Duct
Sander side
Dust collector hose side
Fig. 15
Fig. 14
Polyester bu
ff
Polishing sponge
000Book̲SV1813DA̲ChS.indb 39
000Book̲SV1813DA̲ChS.indb 39
2022/02/16 10:21:48
2022/02/16 10:21:48
