10
English
SELECTING ACCESSORIES
The accessories of this machine are listed on page 240.
APPLICATIONS
○
Compaction when casting concrete for foundations or
concrete products
SPECIFICATIONS
1. Power tool
Model
UV3628DA
Voltage
36 V
Vibration frequencies
12000 min
–1
{times/min} (in normal mode)
15200 min
–1
{times/min} (in power mode)
Vibrating rod
Diameter: 28 mm, Length: 187 mm, Assembly: 825 mm
(Body) Dimensions
Length x Height x Width
1045 x 224 x 109 mm
Battery available for this tool*
Multi volt battery
Weight**
4.2 kg (BSL36B18)
* Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
2. Battery
Model
BSL36A18
BSL36B18
Voltage
36 V / 18 V (Automatic Switching*)
Battery capacity
2.5 Ah / 5.0 Ah
4.0 Ah / 8.0 Ah
(Automatic Switching*)
Available cordless
products**
Multi volt series, 18 V product
Available charger
Sliding charger for lithium ion
batteries
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
3. Charger
Model
UC18YSL3
Charging voltage
14.4 V – 18 V
Weight
0.6 kg
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3
(on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See
Table 1
)
0000Book̲UV3628DA̲EU.indb 10
0000Book̲UV3628DA̲EU.indb 10
2020/01/15 13:39:09
2020/01/15 13:39:09
