CameraLink Area Scan Camera
·
User Manual
23
5.3.3 Set Hardware Trigger
The camera has 1 Opto-isolated input (Line 0), and 1 bi-directional I/O (Line 2) that can be
configured as input signal, as shown below.
Steps:
1.
Click Digital IO Control.
2.
Select Line 2 as Line Selector, and Input as Line Mode.
Figure 5-6
Set Line2 as Input Signal
3.
Select Line 0, or Line 2 as Trigger Source. Here we take Line 0 as an example.
Figure 5-7
Set Hardware Trigger
5.3.4 Set Counter Trigger
The counter trigger provides frequency division to the external trigger signal. You can set counter
trigger as shown below.
Steps:
1.
Click Acquisition Control > Trigger Selector.
2.
Select Frame Burst Start as Trigger Selector, and On as Trigger Mode.
3.
Select Counter 0 as Trigger Source.
Summary of Contents for CameraLink Area Scan Camera
Page 1: ...CameraLink Area Scan Camera User Manual ...
Page 95: ...UD14755B ...
