ID7000 Series Smart Code Reader User Manual
8
Chapter 4 I/O Electrical Features and Wiring
This section introduces the I/O electrical features and wiring of the device.
Note
Device with 12-pin M12 connector and device with 10-pin green terminal have different I/O
electrical features and wiring.
4.1 Device with 12-Pin M12 Connector
The device with 12-pin M12 connector has three opto-isolated inputs and two opto-isolated outputs.
4.1.1 Input Signal
The device's LineIn 0/1/2 are opto-isolated inputs, and their internal circuit is as follows.
Note
●
The input voltage ranges from 5 VDC to 30 VDC.
●
The breakdown voltage is 36 VDC. Keep voltage stable.
Figure 4-1 Internal Circuit of Input Signal