ID7000 Series Smart Code Reader User Manual
55
Note
The default content is
NoRead
.
TCP Output Start Text
The contents of the start part of the data outputted. You can set the contents according to actual
condition.
TCP Output Stop Text
The contents of the end part of the data outputted. You can set the contents according to actual
condition.
TCP Output TCP Delimiter
It refers to the delimiter that separates code name, position, angle, package ID, etc. You can set
it according to actual condition.
Figure 9-29 Result Output via TCP Client
Result Output via FTP
If FTP is selected as
Communication Protocols
, you need to set following parameters.
Note
The configurable parameters may differ by the trigger mode, and here we take the external trigger
mode as an example.
NoRead Image Index
It sets the specific image that is outputted when no code information is read. For example, if you
set this parameter as 5, and the 5th image will be output.