SC2000 Series Vision Sensor User Manual
22
OFF
When the gain mode is set as OFF, and enter gain value manually.
ONCE
When the gain mode is set as ONCE, the device adjusts the gain automatically once according to
the image brightness.
CONTINUOUS
When the gain mode is set as CONTINUOUS, the device adjusts the gain continuously according
to the image brightness.
Note
●
When setting Gain Mode as ONCE or CONTINUOUS, Gain parameter does not take effect.
●
When increasing the gain, the image noise will increase too, which will influence image quality.
8.1.3 Set Exposure Mode
The device supports 3 types of Exposure Mode, including OFF, ONCE and CONTINUOUS.
Go to Solution → Camera → Common → Exposure Mode to select exposure mode and enter
exposure time.
OFF
When the exposure mode is set as OFF, and enter exposure time manually.
ONCE
When the exposure mode is set as ONCE, the device adjusts the exposure time automatically
once according to the image brightness.
CONTINUOUS
When the exposure mode is set as CONTINUOUS, the device adjusts the exposure time
continuously according to the image brightness.
Note
When setting Exposure Mode as ONCE or CONTINUOUS, Exposure Time parameter does not take
effect.
8.1.4 Set Light Source
The device has 8 light bulbs, and you can go to Solution → Camera → Common → Light Source
Adjustment to set light direction, flash mode, duration, delay, etc.
Direction
The device has 8 light bulbs, which are divided into up, down, left and right groups. You can
select UP, DOWN, LEFT, and RIGHT to control respective light bulb groups. By selecting ALL, you
