SC2000 Series Vision Sensor User Manual
47
width, etc.
In Judge Method, enable Judge by Quantity, Judge by Width, Judge by X Axis of Edge Point 0,
Judge by Y Axis of Edge Point 0, , X Judgment of Edge Point 1, Y Judgment of Edge Point 1, and
enter corresponding range according to actual demands.
In Image Display, click
to display or not display edge 0 result, edge 1 result, edge line result
and detection area. Click
to edit OK color, NG color, and transparency.
In OSD, enable Display Test to set text's color, front size, transparency, position X, and position Y.
Figure 8-28 Result Display
8.4.6 Brightness Measure
This tool returns the gray mean value and the gray standard deviation of all the pixels in the ROI of
the object to be measured. When using, the ROI can be drawn at the ideal measurement position.
Image Source
By default, the image source is the images acquired by the device.
Shape
You can use
to maximize the ROI (Region of Interest), or use
to draw the ROI.
Note
●
Before drawing ROI, you need to stop solution operation.
●
After drawing ROI, you need to click Apply.
