SC5000 Series Smart Camera Quick Start Guide
iv
immediately, unplug the power cord, and contact the service center in time.
●
To reduce the risk of fire or electric shock, do not expose the device to rain or moisture.
●
If the device does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the device yourself (we shall not assume any responsibility for
problems caused by unauthorized repair or maintenance).
●
Use the power adapter provided by the official manufacturer. For the specific requirements of
the power adapter, please refer to the device’s specifications.
●
Easy-to-use power-off equipment should be included in the building’s installation wiring.
●
Make sure that the device is firmly fixed when installing it in the use environment.
●
In order to avoid heat accumulation, please keep ventilation around the device.
●
Avoid installing the device in a vibration or shock environment, and keep the device away from
electromagnetic interference (ignorance may cause device damage).
●
Avoid placing the device in places exposed to direct sunlight or poor ventilation, or near heat
sources such as heaters (ignorance may cause a fire hazard).
●
Do not install the indoor device in an environment where it may be exposed to water or other
liquids.
●
Do not use the device in extremely hot, cold, dusty, corrosive, or high-humidity environment. For
specific temperature and humidity requirements, please refer to the device’s specifications.
●
Avoid aiming the lens at strong light like lighting, sunlight or laser beams, etc. Otherwise, the
image sensor will be damaged.
●
Do not touch the image sensor directly. If it is necessary to clean, moisten a soft and clean cloth
with alcohol and gently wipe away the dust. When the device is not in use, add a dust cover to
protect the image sensor.
●
Please understand that you are responsible for the reasonable configuration of all passwords and
other related device security settings, and properly keep your user name and password.
●
Please keep all original package materials of the device properly, so that when a problem occurs,
use the package materials to pack the device and send it to the agent or return it to the
manufacturer for disposal. We shall not assume any responsibility for accidental damages during
transportation caused by non-original package materials.
Electromagnetic Interference Prevention
●
During the installation and use of the device, measures of electromagnetic interference
prevention should be taken. Otherwise, phenomena like image exception and false triggering of
the device may occur.
●
Make sure to isolate and install the device through an insulated bracket.
●
During the installation and use of the device, high voltage leakage must be avoided.
●
When connecting the device and metal accessories, they must be connected firmly to maintain
good conductivity.
●
It is recommended to use an isolated adapter to power the device.
●
The unused cables of the device must be insulated.
●
Use a figure-eight bundle method if the device cable is too long.
●
Do not wire the device and other equipment (especially servo motors/high-power equipment)
together, and keep wiring spacing above 10 cm. If it cannot be avoided, make sure to shield cables.
●
To avoid the accumulation of static electricity, other devices on site like machines, internal
Summary of Contents for SC5000 Series
Page 1: ...SC5000 Series Smart Camera Quick Start Guide ...
Page 31: ...UD26897B ...
