SC7000 Series Smart Camera User Manual
45
gray image of this area after color conversion.
Select Input Source, and select RGB2GRAY, RGB2HSV or RGB2HSI as Conversion Type according to
actual demands. If RGB2GRAY is selected as Conversion Type, you can set Conversion Ratio that
includes General Ratio, Average Ratio, Channel Min, Channel Max, User Ratio, R Channel, B
Channel, and G Channel.
Table 8-3 Conversion Type Description
Conversion Type
Description
General Ratio
0.299r + 0.587g + 0.114b.
r stands for the gray value of the R channel, g stands for the gray value
of the G channel, and b stands for the gray value of the B channel.
Average Ratio
(r + g + b) / 3.
Channel Min
Min (r, g, b)
Channel Max
Max (r, g, b)
User Ratio
You can enter R/G/B conversion ratio according to actual demands.
R Channel
r + 0*g +0*b.
B Channel
0*r + 0*g +b.
G Channel
0*r + g +0*b.
If RGB2HSV or RGB2HSI is selected as Conversion Type, you can set Display Channel to select the
specific channel to display.
Figure 8-23 Color Conversion
Note
After applying color conversion tool, you can view and select output results in the image display
area. Refer to section Operate Image for details.