4.4.2 Video Wall Control
Layout Operation
Select a monitor to open, close, resize, and divide windows.
Steps
1. Press Num+REGION, or press Num+WALL.
2. Tap to select a monitor.
3. Operate the window as desired.
Open window
Press Num+CAM or Num+CAM-G to display an input channel or camera
group on the monitor.
Window
roaming
Long press a window, and you can move it.
Close window
Long press a window, and tap to close the window.
Resize window
• Double tap a window to expand it to cover all the grids it overlays.
Double tap the window again to restore it to the previous size.
• Drag the four corners of the window to resize the window.
Divide window
Press Num+MON and press Num+MULT to divide the window.
Expand/
restore sub-
window
Press Num+MON, press Num+WIN to select a sub-window, and press F2
to expand the sub-window to cover the whole monitor. Press F2 again to
restore the sub-window.
Window Operation
Display an input channel or camera group on a monitor.
Steps
1. Select a monitor to display. Three methods are provided. You are recommended to use the first
one.
• a. Press Num+REGION to show monitors on the region and video wall layout.
b. Press Num+MON. Or tap to select a monitor.
• a. Press Num+DEVICE.
Note
You can check the device number in Device Management interface.
b. Press Num+WALL. For roaming devices, WALL refers to video wall. For decoder, WALL
refers to spliced screen.
DS-1100KI(B) Network Keyboard User Manual
17
