DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
100
1.
Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
.
2.
Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3: Set the Linkage Method for
Motion Detection
in
Section 10.1.1.
Figure 96, Exception Settings
3.
Click
Save
to save the settings.
Configuring Other Alarm
NOTE:
Certain cameras support Wireless Alarm, PIR (passive infrared sensor) Alarm, or Emergency Alarm.
•
Wireless Alarm
When a wireless alarm signal is sent to the camera from the detector such as from a wireless door contact, the wireless
alarm is triggered and a series of response actions can be taken.
1.
Enter the Wireless Alarm Settings interface:
Configuration > Advanced Configuration> Basic Event > Wireless
Alarm
.
Figure 97, Setting Wireless Alarm
2.
Select the wireless alarm number. Up to eight channels of external wireless alarm input are supported.
3.
Check the
Enable Wireless Alarm
checkbox to activate the wireless alarm.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...