DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
138
•
Pre-record:
The time you set to start recording before the scheduled time or the event. For example, if an alarm
triggers recording at 10:00, and the pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s, 30s or not limited.
•
Post-record
: The time you set to stop recording after the scheduled time or the event. For example, if an alarm
triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or 10 min.
•
Stream Type:
Select the stream type for recording.
NOTE:
The record parameter configurations vary by camera model.
4.
Select a
Record Type
. The record type can be
Continuous
,
Motion Detection
,
Alarm
,
Motion | Alarm
,
Motion &
Alarm
, and
Event
.
•
Continuous:
If you select
Continuous
, the video will be recorded automatically according to the time of the
schedule.
•
Record Triggered by Motion Detection:
If you select
Motion Detection
, the video will be recorded when motion
is detected.
Besides configuring the recording schedule, you have to set the motion detection area and check the Trigger
Channel checkbox in the
Linkage Method of Motion Detection Settings
interface. For detailed information, refer
to the
Task 1: Set the Motion Detection Area
in the
Section 10.1.1.
•
Record Triggered by Alarm:
If you select
Alarm
, the video will be recorded when the alarm is triggered via the
external alarm input channels.
Besides configuring the recording
schedule
, you have to set the
Alarm Type
and check the
Trigger Channel
checkbox
in the
Linkage Method
of
Alarm Input Settings
interface. For detailed information, refer to
Section
10.1.3
.
•
Record Triggered by Motion & Alarm:
If you select
Motion & Alarm
, the video will be recorded when the motion
and
alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings on the
Motion Detection
and
Alarm
Input Settings
interfaces. Please refer to Section
10.1.1
and
Section 10.1.3
for detailed information
.
•
Record Triggered by Motion | Alarm:
If you select
Motion | Alarm
, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the settings on the
Motion Detection
and
Alarm
Input Settings
interfaces. Please refer to
Section 10.1.1
and
Section 10.1.3
for detailed information
.
•
Record Triggered by Events:
If you select
Event
, the video will be recorded if any of the events is triggered.
Besides configuring the recording schedule, you have to configure the event settings
.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...
