DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
17
3.
In the router, set the PPPoE user name, password and confirm the password.
4.
Set port mapping. E.g., 80, 8000, and 554 ports. The steps for port mapping vary depending on different routers.
Please call the router manufacturer for assistance with port mapping.
NOTE:
Refer to Appendix 2 for detailed information about port mapping.
5.
Apply a domain name from a domain name provider.
6.
Configure the DDNS settings in the setting interface of the router.
7.
Visit the camera via the applied domain name.
•
Connecting the Network Camera via a Modem
This camera supports the PPPoE auto dial-up function. The camera gets a public IP address by ADSL dial-up after the
camera is connected to a modem. You need to configure the PPPoE parameters of the network camera. Refer to
Section 7.1.3
Configuring PPPoE Settings
for detailed configuration.
Figure 12, Accessing the Camera with Dynamic IP
NOTE:
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes after
rebooting the camera. To solve the inconvenience of a dynamic IP, you need to get a domain name
from the DDNS provider (e.g., DynDns.com). Please follow the steps below for normal domain name
resolution and private domain name resolution to solve the problem.
•
Normal Domain Name Resolution
Figure 13, Normal Domain Name Resolution
1.
Apply a domain name from a domain name provider.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...
