DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
42
Figure 41, RS-485 Settings
2.
Set the RS485 parameters and click
Save
to save the settings.
NOTE:
By default, the Baud Rate is set as 9600 bps, the data bits is 8, the stop bit is 1, and the parity and flow
control is None. The baud rate, PTZ protoco,l and PTZ address parameters must be exactly the same
as the PTZ camera parameters.
Configuring DST Settings
Purpose:
Daylight Saving Time (DST) is a way of making better use of the natural daylight by setting your clock forward one hour
during the summer months and back again in the fall.
Configure the DST according to your actual demand.
1.
Enter the DST configuration interface,
Configuration > System > System Settings > DST
.
Figure 42, DST Settings
2.
Select the start time and the end time.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...