DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
58
Configuring PPPoE Settings
1.
Enter the PPPoE Settings interface:
Configuration >
Network > Basic Settings > PPPoE
.
Figure 61, PPPoE Settings
2.
Check the
Enable
PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
NOTE:
The User Name and Password are assigned by your ISP.
CAUTION!
For your privacy and to better protect your system against security risks, we strongly recommend the use of strong
passwords for all functions and network devices. The password should be something of your own choosing (using a
minimum of eight characters, including at least three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
4.
Click
Save
to save and exit the interface.
NOTE:
A reboot is required for the settings to take effect.
Configuring Port Settings
Purpose:
You can set the port no. of the camera, e.g., HTTP port, RTSP port, and HTTPS port.
1.
Enter the Port Settings interface,
Configuration >
Network > Basic Settings > Port
.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...
