DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
59
Figure 62, Port Settings
2.
Set the
camera ports.
•
HTTP Port
: The default port number is 80 and can be changed to any port number that is not occupied.
•
RTSP Port:
The default port number is 554 and can be changed to any port number, range 1 to 65535.
•
HTTPS Port:
The default port number is 443 and can be changed to any port number that is not occupied.
•
Server Port:
The default server port number is 8000 and can be changed to any port number, range 2000 to
65535.
NOTE:
When you use client software to visit the camera and you have changed the server port number, you
must input the correct server port number in the login interface to access the camera.
•
WebSocket Port:
The default port number is 7681 and can be changed to any port number, range 1 to 65535.
•
WebSockets Port:
The default server port number is 7682 and can be changed to any port number, range 1 to
65535.
NOTE:
WebSocket and WebSockets protocol are used for plug-in free live view. For detailed information, see
7.2.11 Network Service.
3.
Click
Save
to save the settings.
NOTE:
A reboot is required for the settings to take effect.
Configure NAT (Network Address Translation) Settings
Purpose:
The NAT interface allows you to configure the UPnP
™
parameters.
Universal Plug and Play (UPnP
™
) is a networking architecture that provides compatibility among networking equipment,
software, and other hardware devices. The UPnP protocol allows devices to connect seamlessly and simplifies the
implementation of networks.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...