User Manual of Network Fisheye Camera
121
Chapter 13
Intersection Analysis
Purpose:
Intersection Analysis is used to monitor the human flow in an intersection-like scene.
Note:
The function varies according to different camera models.
Steps:
1.
Enter the Intersection Analysis configuration interface:
Configuration >
Intersection Analysis
.
2.
Check
Enable Intersection Analysis
checkbox to enable the function.
3.
Set up rules.
a)
Go to Area Settings.
b)
Click Draw Area. Draw area in the live view window by left click the end-points.
The area should be a polygon which has no more than 10 edges. Each edge covers
one way of the intersection.
c)
Adjust the arrow direction on each edge of the area. The arrow stands for the
direction that the flow leaves the intersection.
d)
Select data type (daily report, weekly report, monthly report, and annual report).
You can send the intersection analysis report to the configured email address.
4.
Go to
Arming Schedule
tab, and click-and-drag the mouse on the time bar to set
the arming schedule.
5.
Go to
Linkage Method
tab, and select the linkage method by checking the
checkbox of notify the surveillance center.
6.
Click
Save
to save the settings.
Note:
The Intersection Analysis statistics will be calculated in Application tab. Go
to
Application
to check the reports.
