User Manual of Network Fisheye Camera
55
configure here.
4.
Click
Save
to save and finish the settings.
Notes:
•
A reboot is required for the settings to take effect.
•
To lower the risk of information leakage, you are suggested to enable SNMP v3
instead of SNMP v1 or v2.
6.2.2
Configuring FTP Settings
Purpose:
You can configure the FTP server related information to enable the uploading of the
captured pictures to the FTP server. The captured pictures can be triggered by events
or a timing snapshot task.
Steps:
1.
Enter the FTP Settings interface:
Configuration > Network > Advanced Settings > FTP
Figure 6-8
FTP Settings
2.
Input the server address and port.
3.
Configure the FTP settings; and the user name and password are required for the
server login.