User Manual of Network Fisheye Camera
65
2.
Check the
Enable IEEE 802.1X
checkbox to enable the feature.
3.
Configure the 802.1X settings, including Protocol, EAPOL version, User Name,
Password and Confirm.
Note:
The
EAPOL version
must be identical with that of the router or the switch.
4.
Enter the user name and password to access the server.
5.
Click
Save
to finish the settings.
Note:
A reboot is required for the settings to take effect.
6.2.8
Integration Protocol
Purpose:
If you need to access to the camera through the third party platform, you can enable
CGI function. And if you need to access to the device through ONVIF protocol, you
can configure ONVIF user in this interface. Refer to ONVIF standard for detailed
configuration rules.
CGI
Check the Enable Hikvision_CGI checkbox and then select the authentication
from the drop-down list.
Note:
Digest is the recommended authentication method.
ONVIF
Steps:
1.
Check the Enable ONVIF checkbox to enable the function.
2.
Add ONVIF users. Up to 32 users are allowed.
Set the user name and password, and confirm the password. You can set the
user as media user, operator, and administrator.
Note:
ONVIF user account is different from the camera user account. You
have set ONVIF user account independently.
3.
Save the settings.
Note:
User settings of ONVIF are cleared when you restore the camera.
