User Manual of Network Fisheye Camera
89
Figure 9-5
Video Tampering Detection Settings
3.
Draw the detection area as in the normal configuration mode.
4.
Move the slider to set the sensitivity.
5.
Click
Arming Schedule
to set arming schedule as that in
Task 2 Set the Arming
Schedule for Motion Detection in Section 5.6.1
.
6.
Click
Linkage Method
to set linkage method as that in
Task 3 Set the Linkage
Method for Motion Detection in Section 5.6.1
.
7.
Click
Save
to save the settings.
9.3
Configuring Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
Configuration > Events > Basic Event > Alarm Input
