User Manual of Network Fisheye Camera
35
The preset name turns from black to grey.
4.4.3
Setting/Calling/Deleting a Patrol
Purpose:
A patrol is a scanning track specified by a group of defined presets, with the duration
time at each preset separately programmable.
Before you start:
At least 2 presets are required to set a patrol.
Setting a Patrol
Steps:
1.
Click the icon
to enter the patrol configuration interface.
Figure 4-8
Patrol Configuration (1)
2.
Select a path No. from the drop-down list, and click the icon
to configure
patrol path.
3.
Click
to add a preset into the path, and click
to delete a preset.
4.
Set the preset number, speed and lingering time at each preset. You can adjust the
order of presets by using
and
.
Figure 4-9
Patrol Configuration (2)
5.
Click
OK
to save patrol path.
