Handheld Thermography Camera
·
User Manual
26
Go to Palettes Settings (
) to set the palette.
Purpose:
Set the alarm rules and the device will alarm when the temperature
triggers the rule.
Steps:
1.
Go to Palettes Settings (
) from the main menu.
2.
Tap on the icons to select an alarm rule type.
3.
(Optional) Press the
△
and
▽
to select between upper limit
and lower limit.
4.
Press the
◁
and
▷
to adjust the rule temperature.
Above Alarm
Set the alarm temperature, and the
device alarms when target temperature
is higher than rule temperature.
Below Alarm
Set the alarm temperature, and the
device alarms when target temperature
is lower than rule temperature.
Interval Alarm
Set the alarm temperature section (e.g.,
90° C - 150° C), when target temperature
is within the section (e.g., 100° C), the
device alarms.
Insulation Alarm
Set the alarm temperature section (e.g.,
90° C - 120° C), when target temperature
is without the section (e.g., 70 ° C or
125° C), the device alarms.
5.
Press
to exit the setting interface.
Summary of Contents for DS-2TP03-15VM/W
Page 40: ......
