HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
32
Close the Window
Figure 4-35
Configuring Decoding Output
4.3
Purpose
In the output list, there are two kinds of video output signals, respectively BNC and HDMI. You can
configure the resolution and output mode.
Configuring BNC Output
Click
Video Wall Configuration
to enter the corresponding interface. Right click one of the
Step 1
BNC signal sources.
BNC Decoding Output
Figure 4-36
Right click one of BNC signal sources and select
Resolution Configuration
to pop up the
Step 2
interface as below.
Resolution Configuration
Figure 4-37
Select the resolution from the
LCD Resolution
drop-down list. PAL and NTSC are selectable.
Step 3
Check the checkbox of
Batch Configuration
to set the same configuration for other outputs
Step 4
with same signal source.
