66
are:
Step 1:
Enter into “Image Setup” menu.
Step 2:
Select one camera.
Step 3:
Enable the check box on the right side of camera name, then you move
“Active Frame” to “Position” button, press
[
ENTER
]
to enter into camera name position
setup interface, in that interface, you can use
[
È
] [
Ç
] [
Æ
] [
Å
]
keys to move camera name
position. When the position is fixed, press
[
ENTER
]
and return “Image Setup” menu, and
press “Confirm” button to save it. In the “Image Setup” menu, press “Cancel” button or
[
ESC
]
key, you can abort the modification.
5.5.2 Video Parameters Setup
For different camera and different background, in order to get the best video image,
you need to adjust video parameters such as brightness, saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video parameters
of one camera to any other cameras. Here are the setup steps:
Step 1: Enter into “Image Setup” menu:
Step 2: Select camera:
Please use
[
È
] [
Ç
]
keys to select one camera.
Step 3: Click “Color” setup button and enter into sub menu. Adjust brightness,
contrast, saturation and hue:
Summary of Contents for DS-7000HI Series
