Digital Video Recorder User Manual
103
MP signal is switched to 1080p signal, the PAL will be switched to 1080p/25Hz, and the
NTSC will be switched to 1080p/30Hz.
For all the –F series DVR, the analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP
signal input can be recognized and connected automatically.
If the configured encoding resolution conflicts with the resolution of the front-end camera,
the encoding parameters will adjust automatically to meet the front-end camera. E.g., if the
resolution of the front-end camera is 720p, then the encoding resolution of the main
stream will adjust to 720p automatically.
The resolution of 960 × 1080 (1080P Lite) is avaiable when the 1080P Lite is enabled in the
Record>Advanced Settings interface (refer to
Chapter 5.12 Configuring 1080P Lite
).
Please refer to the
Appendix-Specifications
for the supported resolutions of different
models.
Bitrate Type:
Set the bitrate type to be Variable or Constant.
Video Quality
: Set the video quality of recording, with 6 levels configurable.
The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the Main
Stream (Event) of the IP Camera.
Frame Rate:
Set the frame rate of recording.
For DS-7200/7300/7600/8100/9000HUHI series, when 3 MP signal input is connected, the
frame rate of the main stream cannot exceed 15 fps.
For DS-7200HUHI-F/S series DVR, when 5 MP signal input is connected, the frame rate of
the main stream cannot exceed 10 fps. When 4 MP signal input is connected, the frame rate
of the main stream cannot exceed 15 fps.
For DS-7200HUHI-F/S series DVR, the 5 MP20 signal input supports 20 fps in live view, and
the 4 MP25 and 4 MP30 signal inputs support real-time frame rate in live view.
Max. Bitrate Mode:
Set the mode to General or Custom.
Max Bitrate (Kbps):
Select or customize the maximum bit rate for recording.
Max. Bitrate Range Recommended:
A recommended max. bit rate range is provided for
reference.
Max. Average Bitrate (Kbps):
Set the max. average bit rate which refers to the average
amount of data transferred per unit of time.
Video Encoding:
For 7300/8100/9000HUHI-F/N series, you can select H.264 or H.265 for the
IP camera.
When the connected IP camera does not support H.265, only H.264 can be seleted for the video
encoding.
