128
Figure 156 Disk Format Progress Bar
Enabling HDD Overwrite
Enabling HDD overwrite will allow the DVR to overwrite the installed disks once the disks are full.
To enable HDD overwrite:
1.
Enter the HDD menu by going to Menu > System Configuration > HDD.
2.
Select the Record Information tab, as shown in Figure 157.
Figure 157 Record Information Menu
3.
Check the Overwrite checkbox.
4.
Click the Apply button.
5.
Click
to exit.
Enabling HDD Sleeping
Enabling HDD Sleeping will allow the DVR to set HDD to sleep status when HDD is idle.
To enable HDD sleeping:
1.
Enter the HDD menu by going to Menu > System Configuration > HDD.
2.
Select the Record Information tab, as shown in Figure 158.
Figure 158 Record Information Menu
3.
Check the Sleeping checkbox.
4.
Click the Apply button.
5.
Click
to exit.
Summary of Contents for DS-7200HGHI-SH Series
