19
3.
Alphanumeric/Control Buttons:
Alphanumeric/Control buttons used in various menus of the
DVR.
Alphanumeric
-some uses include:
•
Switching to the corresponding channel in Preview or PTZ Control mode.
•
Inputting numbers and characters in Edit mode.
•
Switching between different channels in Playback mode.
Control
-some uses include:
•
ESC Button:
The ESC button is used to escape to the previous menu and to
arm/disarm the DVR in Preview mode.
•
REC/SHOT Button:
The REC/SHOT button is used to enter the Quick Schedule
Recording interface. If used when controlling a PTZ, pressing the REC/SHOT button
and then a Numeric button will call a PTZ preset.
•
PLAY/AUTO Button:
The PLAY/AUTO button is used to enter the Playback menu. It
is also used to turn audio on/off in the Playback menu and auto scan in the PTZ
Control menu.
•
ZOOM+ Button:
The ZOOM+ button is used to zoom the PTZ camera in when in the
PTZ Control menu.
•
A/FOCUS+ Button:
The A/FOCUS+ button is used to adjust focus in the PTZ
Control menu. It is also used to switch between input methods (upper and lowercase
alphabet, symbols and numeric input). It can also be used to clear entire masked
areas, such as in the Motion Detection and Privacy Mask menus.
•
EDIT/IRIS+ Button:
The EDIT/IRIS+ button is used to edit text fields. When editing
text fields, it will also function as a Backspace button to delete the character in front
of the cursor. On checkbox fields, pressing the EDIT/IRIS+ button will tick the
checkbox. In PTZ Control mode, the EDIT/IRIS+ button opens up the iris of the
camera. In Playback mode, it can be used to generate video clips for backup.
•
MENU/WIPER Button:
Pressing the MENU/WIPER button will return the user to the
Main menu (after successful login). Pressing and holding the button for 5 seconds
will turn off audible key beep. The MENU/WIPER button will also bring up Sensitivity
Interface settings. In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable).
•
F1/LIGHT Button:
The F1/LIGHT button when used in a list field will select all items
on the list. In PTZ Control mode, it will turn on/off PTZ light.
•
F2/AUX Button:
The F2/AUX button is used to cycle through tab pages. It will also
bring up the Channel & OSD Position settings.
•
MAIN/SPOT/ZOOM- Button:
The MAIN/SPOT/ZOOM- button is used to switch to
the control of spot output. In PTZ Control mode, it can be used to zoom the camera
out.
•
PREV/FOCUS- Button:
The PREV/FOCUS- button is used to switch between single
screen and multi-screen mode. In PTZ Control mode, it is used to adjust the focus in
conjunction with the A/FOCUS+ button. It can also be used to select entire masked
areas, such as in Motion Detection and Privacy Mask menus.
4.
Direction/Enter Buttons:
•
Direction Buttons:
The Direction buttons are used to navigate between different
fields and items in menus. In playback mode, the Up and Down button is used to
fast-forward and rewind recorded video. The left and Right button will select the next
Summary of Contents for DS-7200HGHI-SH Series
