61
1.
Enter the Live View menu, shown in Figure 61 by going to Menu > System
Configuration > Live View.
2.
Select the View tab.
3.
Select the Video Output Interface to configure camera order for.
4.
Select the Screen Configuration you would like to use in Live Feed by clicking
. The preview of the screen configuration on the right will change
depending on the option selected.
5.
Click to select a screen in the right region and double-click to select a channel in the left
region. Thus the selected channel will be displayed in the corresponding screen.
Note:
means no channel will be displayed in this screen.
6.
Click
to start live view of all channels and click
to stop live view all channels.
Click
or
to go to the previous or next page. For example, in 2x2 screen
configuration mode, pressing the Next button will bring up the next set of 4 displays.
7.
Click the Apply button to save settings.
8.
Click
to exit out of the menu.
Summary of Contents for DS-7200HGHI-SH Series
