63
4) Select the camera resolution in the Resolution dropdown list. The options for the
camera resolution include 4CIF, 2CIF, CIF and QCIF.
5) Select the bit rate type in the Bitrate Type dropdown list. The options for the camera
bit rate type include Variable and Constant
6) Select the recording Frame Rate to use for the designated camera. A rate of 30 (Full
Frame) all the way down to 1/16 of a frame can be selected.
7) Set the video quality using the Video Quality slider. Increasing the video quality will
also increase the max. bit rate recommended. The max. bit rate can be adjusted
according to this recommend.
8) Select the max. bit rate mode in the Max. Bitrate Mode dropdown menu. The options
for the camera max. bit rate mode include General and Customize (32 to 8192 kbps).
9) Check the checkbox of record audio to enable or disable audio while recording.
10) Click the Apply button to save the settings.
11) Click the Copy button to copy the settings to other channels if the same settings can
also be used for other channels.
3.
Select Substream tab, as shown in Figure 63, to configure the sub stream parameters.
The steps are the same as that of the main stream configuration.
Figure 63 Substream Settings Menu
4.
Select record tab, as shown in Figure 64, to configure some parameters of recording.
Figure 64 Record Settings Menu
Summary of Contents for DS-7200HGHI-SH Series
