83
Figure 88 UPnP Settings Menu
2.
Check the Enable UPnP checkbox.
3.
Select the Mapped Type. There are two types:
Auto
: Automatic mapping port 8000, 80, 554.
Manual
: Edit the port by click
.
4.
Click the Apply button to save the settings.
Configuring More Settings
You can configure alarm host and port by selecting the more setting tab, as shown in Figure 89.
Figure 89 More Settings Menu
1.
Alarm Host
: Send the alarm event or exception message to the alarm host when an
alarm is triggered. The remote alarm host must have the CMS (Client Management
System) Software installed.
Enter the IP address of the remote PC on which the CMS Software is installed in.
Enter the alarm monitoring port in Alarm Host Port, which must be the same as the
port configured in the software.
Summary of Contents for DS-7200HGHI-SH Series
