F R O N T P A N E L
( c o n t i n u e d )
R E A R P A N E L S
No. Item
Description
1
AUDIO IN
RCA connector
2
Line In
RCA connector
3
AUDIO OUT
RCA connector
5
RS-232
Connector for RS-232 devices
6
eSATA
Connects external SATA HDD, CD/DVD-RW
7
VIDEO IN
BNC interface for TVI and analog video input
8
USB Ports
USB ports for additional devices
9
HDMI
HDMI video output connector
10 VGA
DB-15 connector for VGA output. Display local video output and menu.
11 LAN
Connector for network
12 I/O
RS-485
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of
PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first
DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR.
Keyboard Keyboard connector
Alarm In
Connector for alarm input
Alarm Out Connector for alarm output
13 GND
Ground
14 Power
100 to 240 VAC power
15 Power Switch Switch for applying power to the device (do not power
off
device until you first
shut
down
the device’s processes by using the
On/Off Switch
on the front panel)
1
Status Indicators
Power Indicator:
Green when power switch on real panel is on, red when
power switch is off
Ready Indicator:
Green when DVR is functioning properly
Status Indicator:
N/A
Alarm Indicator:
Red when a sensor alarm is detected
HDD Indicator:
Blinks red when data is being read from or written to HDD
TX/RX Indictor:
Blinks green when network connection is functioning properly
2
On/Off Switch
Starts up or shuts down the DVR processes
3
USB Port
Connects USB mouse or USB flash memory devices
4
Drive Bay
Location for DVD-RW drive
5
Direction Buttons
Navigation keys
6
Enter Key
Confirms selection
7
Numeric/Controls
Switches channel in Preview or PTZ Control mode, Inputs numbers in Edit
mode, switches channels in Playback mode
8
Jog Shuttle
Moves menu selection. In Playback, outer ring speeds up/slows down video.
Inner ring jumps 30 seconds forward/backward in a video. In Preview mode,
cycles through channels.