HIKVISION DS-7600 Series User Manual Download

Page: 159 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

158

Figure 9. 18

Host/Others Settings Menu

Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and

the HTTP Port is 80, and you can change them according to different requirements.

Click

to save and exit the interface.

Note:

The Server Port should be set to the range of 2000-65535 and it is used for remote client software access.

The HTTP port is used for remote IE access.

9.2.9

Configuring Email

Purpose:

The system can be configured to send an Email notification to all designated users if an alarm

event is detected, etc., an alarm or motion event is detected or the administrator password is

changed.

Before configuring the Email settings, the NVR must be connected to a local area network (LAN)

that maintains an SMTP mail server. The network must also be connected to either an intranet or

the Internet depending on the location of the e-mail accounts to which you want to send

notification.

Steps:

Enter the Network Settings interface.

Menu >Configuration> Network

Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the

Network Settings menu, as shown in Figure 9. 19.

Figure 9. 19

Network Settings Interface

Click

to save the settings.

Select the

Email

tab to enter the Email Settings interface.

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Related manuals for DS-7600 Series

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Related manuals for DS-7600 Series

Brands by name

Popular brands