User Manual of Embedded Net DVR
Page
44
Total
113
Chapter5 Parameters Setup Guide
Only the users that have “Parameters Setup” right need read this chapter. When the following
parameters are modified and saved, you must reboot the DVR to make the new parameters take into
effective. Other parameters do not need to reboot.
z
Any network parameters
z
Stream type, resolution and record schedule
z
External alarm sensor type
z
View tampering alarm schedule
z
Video lost alarm schedule
z
Motion detection alarm schedule
z
External alarm schedule
z
Alarm output schedule
z
Transaction
z
RS232 work mode
z
Change video output standard
5.1 Administrator
and
Password
When DVR is left from factory, there is one default administrator. The name is “admin” and
password is “12345”. The name can not be changed, while the password can be.
Password modification
Press MENU key, in the login dialog, select the username as “admin”, use
→
key, move
cursor to password edit box, input “12345”, press “Confirm” to enter into administrator menu.
Move “Active Frame” to “User” icon, press ENTER key to enter into “User Management”
menu.
