User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
45
Gateway:
when the mobile DVR connects to server through a wireless router or communicates in different network segments, you need to setup the gateway
IP.
Multicast IP:
it is one D-class IP address, among 224.0.0.0 to 239.255.255.255. We suggest using 239.252.0.0 to 239.255.255.255. If you do not use multicast
function, you do not need to set.
Http Port:
the port is for IE browser. The default value is 80. It can be modified.
DNS Server:
reserved
Remote Host IP and Port:
If you set this IP and Port, when there is an alarm or an exception happened, DVR will send information to that host IP. (This is
reserved.)
Download Server IP:
when you use wifi or other network to upload recording files, you need to set the download server IP.
Wireless Modem:
It includes: None, CDMA, EVDO, WCDMA, the default option is None. When user use internal wireless module or connect the external
module with USB to login the remote server, it is necessary to setup the modem according to the wireless module.
Note:
1.
The items with”*” means LAN configurations. If you want to communicate in different network segments, you need to set gateway.
2.
The bandwidth of every channel please refers to the Max bit rate setup of section 5.4.1.
5.6
PTZ
In “PTZ” menu, you can setup the PTZ parameters and G-mouse mode. (Fig.5.21)
PTZ parameters include RS-485 parameters, protocol, PTZ address, preset point, sequence and cruise.
G-mouse mode only has one parameter: bit rate.
Firstly, you need to select one camera; the other parameters are as following:
RS-485 parameters:
Including baud rate, data bit, stop bit, parity flow control, etc. These parameters must be the same as those of PTZ Protocol.
PTZ parameters:
The PTZ protocol of DVR includes Hikvision, Pelco-p, Pelco-D, SAE/YAAN, Samsung, Howell, Panasonic, Philips, etc. The PTZ address in this
interface should match the dialed address on PTZ.
Preset setup:
Preset is using one number to represent camera’s position, zoom, focus and iris. One device has 128 preset points. You can press “Setup” button
on the right side of “Preset” item to enter “Set Preset” interface. (Fig.5.22)In this menu you can add, adjust and delete preset points.
Note:
PTZ control and external alarm in can call the preset points. Please refer to section4.4 and section 5.3.1.
Sequence setup:
Press “Setup” button on the right side of “Sequence No” item to add cruise point and delete cruise point.
