User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
48
You can select more than one handle methods. For example, if you choose exception type as “HD
Error”, you can select “Audible Warning” and “Upload to Center”. When the HDD has an error, the
DVR will warning and the center host PC will receive a warning message.
Note:
Speed limit function need GPS, user can set that in “Mobile”->“GPS”.
5.8
Mobile Setup
Mobile setup is a special menu for mobile DVR (Fig.5.25), including:
Boot & Halt:
control the power on/ off time of mobile DVR.
GPS:
GPS functions and parameters.
PPP
: Set wireless modem type and parameters.
WVS:
the parameters for login the wireless remote monitoring server.
iVMS:
the parameters for login the IVMS7000 platform.
5.8.1
Boot & Halt Setup
In the boot & halt menu (Fig.5.27),you can setup the shutdown mode and time. There are two
normal modes:
1. Halt Delay
When the KEY interface of the device link with the vehicle’s ignition switch, you can delay halt by
setup the parameters. (The connection method please refer to section 2.3.3)
As in Fig.5.27, user can set a halt delay time which means the DVR will continuously working after the
vehicle power off until exceeding the halt delay time. The minimum delay time is 0 min, the
maximum delay time is 6 hours. The recommended period is between 30 min to 2 hours.
2. Auto Work
Fig.5.26 Mobile Setup
Fig.5.27 Boot&Halt
