UM DS-90xxHUHI-F8/N User Manual 041717NA
107
NOTE:
Three attached pictures can be sent for one analog camera when the
alarm is triggered.
•
Interval:
Refers to the time between two actions of sending attached pictures.
•
E-mail Test:
Sends a test message to verify the SMTP server can be reached.
4.
Click the Apply button to save the e-mail settings.
5.
Click the Test button to test whether your E-mail settings work. The corresponding Attention
message box pops up.
Figure 163, E-Mail Testing Attention
16.2.11.
Checking Network Traffic
You can check the network traffic to obtain real-time information of DVR such as linking status,
MTU, sending/receiving rate, etc.
1.
Enter the Network Traffic interface, Menu > Maintenance > Net Detect.
Figure 164, Network Traffic Interface
2.
You can view the sending rate and receiving rate information on the interface. The traffic
data is refreshed every second.
16.3.
Configuring Network Detection
You can obtain network connecting status of the DVR through the network detection function, including
network delay, packet loss, etc.
16.3.1.
Testing Network Delay and Packet Loss
1.
Enter the Network Traffic interface, Menu > Maintenance > Net Detect.
2.
Click the Network Detection tab to enter the Network Detection interface.
