UM DS-90xxHUHI-F8/N User Manual 041717NA
141
9.
Select the camera(s) to be configured with the same OSD settings. You can also check the Analog
checkbox to select all cameras.
10.
Click the OK button to finish the Copy settings and go back to the OSD Configuration interface.
11.
Click the Apply button to apply the settings.
20.2.
Configuring Privacy Mask
You can configure four-sided privacy mask zones that cannot be viewed or recorded by the operator.
1.
Enter the Privacy Mask Settings interface, Menu > Camera > Privacy Mask.
2.
Select the camera to set privacy mask.
3.
Check the Enable Privacy Mask checkbox to enable this feature.
Figure 217, Privacy Mask Settings Interface
4.
Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
NOTE:
Up to four privacy mask zones can be configured, and the size of
each area can be adjusted.
5.
The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone 1-4 icons on the right side of the window, or click Clear All to clear all zones.
Figure 218, Set Privacy Mask Area
6.
Click the Copy button to copy the privacy mask settings of the current camera to other cameras.
7.
Click the Apply button to save the settings.