UM DS-90xxHUHI-F8/N User Manual 041717NA
3
Product Key Features
General
Connectable to HD-TVI and analog cameras
Supports Hikvision-C protocol for Up-the-Coax control of camera OSD and Hikvision PTZ cameras
Each channel supports dual-streams. Sub-stream supports up to WD1 resolution
The HUHI series main stream supports up to 3 MP resolution on all channels. IP cameras up to 8MP can be added. Analog channels can be disabled one by one
to allow for additional IP cameras
If the 3 MP camera is connected to the channel that supports up to 1080p signal input, it will switch to 1080p signal input. When the 3 MP signal is switched to
1080p signal, the PAL will be switched to 1080p/25 Hz, and the NTSC will be switched to 1080p/30 Hz
Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.
Encoding for both video stream and video & audio stream; audio and video synchronization during composite stream encoding
One-key enable or disable H.264+
Supports configuring night to day sensitivity, day to night sensitivity and IR light brightness for the connected analog cameras supporting these parameters
Watermark technology
Local Monitoring
1/4/6/8/9/16 screen live view is supported, and the display sequence of screens is adjustable
Live view screen can be switched in group and manual switch and automatic cycle live view are also provided, the interval of automatic cycle can be adjusted
CVBS output only serves as the aux output or live view output
Quick setting menu is provided for live view
The selected live view channel can be shielded
Motion detection, video-tampering detection, video exception alarm, video loss alarm, and VCA alarm functions
Privacy mask
Support for over 60 PTZ protocols, including Pelco D, Pelco C, etc.; PTZ preset, patrol and pattern
Zooming in/out by clicking the mouse and PTZ tracing by dragging mouse
HDD Management
Each disk with a maximum of 6 TB storage
8 network disks (8 NAS disks, 8 IP SAN disks, or n NAS disks + m IP SAN disks (n + m ≤ 8)) can be connected
Remaining recording time of the HDD can be viewed
Supports cloud storage
S.M.A.R.T. and bad sector detection
HDD sleeping function
HDD property: redundancy, read-only, read/write (R/W)
HDD group management
HDD quota management; different capacity can be assigned to different channels.
Recording and Playback
Holiday recording schedule configuration
Cycle and non-cycle recording modes
Normal and event video encoding parameters
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm, and Event
8 recording time periods with separated recording types
Main stream and sub-stream configurable for simultaneous recording
Pre-record and post-record for motion detection triggered recording, and pre-record time for schedule and manual recording
Searching record files and captured pictures by events (alarm input/motion detection)
Customization of tags, searching and playing back by tags
Locking and unlocking of record files
Local redundant recording and capture when configured with compatible NAS devices
When HD-TVI input is connected, the resolution will be overlaid on the bottom right corner of the live view for five seconds. When CVBS input is connected, the
information such as NTSC or PAL will be overlaid on the bottom right corner of the live view for 5 seconds.
Searching and playing back record files by camera number, recording type, start time, end time, etc.
Smart playback allows for faster searching
Main stream and sub-stream selectable for local/remote playback
Digital zooming during playback
Multi-channel reverse playback
Supports pause, fast forward, slow forward, skip forward, and skip backward when playing back, selecting playback time by dragging the mouse on the progress
bar
4/8/16-ch synchronous playback
Manual capture, continuous capture of video images and playback of captured pictures