UM DS-90xxHUHI-F8/N User Manual 041717NA
95
Figure 148, Detailed Event
4.
Set the alarm linkage actions.
5.
Click Apply to save the settings.
15.7.
Setting Alarm Response Actions
Alarm response actions will be activated when an alarm or exception occurs, including Full Screen
Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Send E-mail, and Trigger Alarm Output.
•
Full Screen Monitoring
– When an alarm is triggered, the local monitor (HDMI or VGA monitor)
displays in full screen the video image from the alarming channel configured for full screen monitoring.
•
Dwell Time.
If alarms are triggered simultaneously in several channels, their full-screen images will be
switched at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to
Menu > Configuration > Live View.
•
Auto Switch.
Auto-switch will terminate once the alarm stops and will return to the Live View interface.
•
Audible Warning
– Triggers an audible beep when an alarm is detected.
•
Notify Surveillance Center
– Sends an exception or alarm signal to remote alarm host when an event
occurs. The alarm host refers to the PC installed with Remote Client.
NOTE:
The alarm signal will be transmitted automatically at detection mode
when the remote alarm host is configured.
•
Send E-Mail
– Sends an e-mail with alarm information to a user or users when an alarm is detected.
•
Trigger Alarm Output
– Triggers an alarm output when an alarm is triggered.
1.
Enter Alarm Output interface, Menu > Record Configuration > Trigger > Alarm Output.
2.
Select an alarm output and set alarm name and dwell time.