UM DS-90xxHUHI-F8/N User Manual 041717NA
96
Figure 149, Alarm Output Settings Interface
NOTE:
If Manually Clear is selected in the Dwell Time drop-down list, clear it
by going to Menu > Record Configuration > Trigger.
3.
Click the Set button to set the alarm output arming schedule.
4.
Choose one day of a week, and up to eight time periods can be set within each day.
NOTE:
Time periods must not repeat or overlap.
Figure 150, Set Arming Schedule of Alarm Output
5.
Repeat the above steps to set arming schedule for other days of a week. You can also click the
Copy button to copy an arming schedule to other days.
6.
Click the OK button to complete the alarm output arming schedule setting.
7.
Click the Apply button to save the settings.
16.
Network Settings
16.1.
Configuring General Settings
Network settings must be properly configured before operating the DVR over a network.
1.
Enter the Network Settings interface, Menu > Configuration > Network.