Video Wall Controller • User Manual
7
Example: When the marking type is Z Shape, select the sending port of the sending card, and
click the start point and end point of the frame on the right according to the cabinet number
on site to make quick connection.
Cancel: Cancel the previous operation.
Restore: Restore the previous operation.
Reset Current Sending Port: Click the sending port of the sending card on the left. Then click
Reset Current Sending Port to reset the connection settings of the selected sending port.
Reset All Sending Ports: Reset the connection settings of all sending ports.
6. Click OK.
Set On-Site Connection
After the setting, the cabinet screen on site will display black.
Set Basic Parameters
Set basic parameters of the receiving card display.
Enter Video Wall Configuration
→
Decoding Output. Select LED sending card in the Output List
(Example of naming the LED sending card: LEDSendCard_Board19_1). Right-click and select Basic
Control.
Summary of Contents for DS-C30S-04HI
Page 1: ...0 Video Wall Controller User Manual...
Page 38: ...0 UD26426B...
