Video Wall Controller • User Manual
16
Select a signal source.
Set the cropping pixels of four edges.
The pixel range of cropping in all directions is between 0 and 200. It is required to be a
multiple of 2, and 4 × 2 alignment.
Click Save.
The signal source splicing can combine multiple signal source images according to a certain splicing
scale to form a new spliced picture. The spliced picture is output as a single signal source, and the
spliced signal source will not be shown in the signal source list. This function is only supported by
ultra-high definition signal sources (such as 4K HDMI input channel or DP input channel). Signal
sources will be spliced to form a new image with higher resolution.
Only local signal source can be spliced.
All spliced signal sources should have the same resolution. Different resolution may affect
display effect.
The new spliced picture will be presented in a single-screen window when displayed on the wall.
When the new spliced picture is roaming and zooming, the signal source also roams and zooms
along with it.
Enter Configuration
→
Signal Source Configuration
→
Signal Source Splicing.
Click Add.
Summary of Contents for DS-C30S-04HI
Page 1: ...0 Video Wall Controller User Manual...
Page 38: ...0 UD26426B...
