Chapter 3
Installation
3.1 DIP Switch
Description
The DIP switch module is shown below. The No. of DIP switch from
left
to right is 1 to 8.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is
off.
If you
set the DIP switch like the
figure
displayed below, its binary value is 00001100, and its decimal
value is 12.
Table 3-1
Description
of DIP Switch
No.
Description
DIP Switch Status
1 to 4
Address of RS-485
1: 1
0: 0
5
Card Security
Note
●
For DS-K1108AE/AEK, the
DIP switch is reserved.
1: Enable M1 card
encryption
function,
and disable door
open via NFC card.
0: Disable M1 card
encryption
function,
enable door open via
NFC card, and read card No.
6
Wiegand protocol or RS-485
protocol.
1: Wiegand protocol
0: RS-485 protocol
7
Wiegand Protocol (available
when No. 6 is 1)
1: Wiegand protocol of 26-bit;
0: Wiegand protocol of 34-bit.
8
Matched Resistance (available
for RS-485 protocol)
1: Enable
0: Disable
DS-K1109 Series Card Reader User Manual
4
