Chapter 4 Wiring
You can connect the RS-485 terminal with the RS-485 card reader, connect the NC/NO and COM
terminal with the door lock, connect the SEN and GND terminal with the door contact, the
BTN/GND terminal with the exit
button,
and connect the Wiegand terminal with the Wiegand card
reader or the access controller.
If connect the WIEGAND terminal with the access controller, the face
recognition
terminal can
transmit the
authentication
information
to the access controller and the access controller can
judge whether to open the door or not.
Note
●
If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the
power supply and the device should be no more than 20 m.
●
If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the
power supply and the device should be no more than 30 m.
●
If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the
power supply and the device should be no more than 40 m.
●
The external card reader, door lock, exit
button,
and door
magnetic
need individual power
supply.
4.1 Terminal
Description
The terminals contains power input, RS-485, Wiegand output, and door lock.
The
descriptions
of the terminals are as follows:
Table 4-1 Terminal
Descriptions
Group
No.
Function
Color
Name
Description
Group A
A1
Power Input
Red
+12 V
12 VDC Power
Supply
A2
Black
GND
Ground
Group B
B1
RS-485
Yellow
485+
RS-485 Wiring
B2
Blue
485-
B3
Black
GND
Ground
Group C
C1
Wiegand
Green
W0
Wiegand
Wiring 0
DS-K1T342 Series Face
Recognition
Terminal User Manual
20
Summary of Contents for DS-K1T342 Series
Page 1: ...DS K1T342 Series Face Recognition Terminal User Manual...
Page 112: ...Figure 8 3 Wi Fi 3 Add Wi Fi 1 Tap DS K1T342 Series Face Recognition Terminal User Manual 97...
Page 163: ...Figure 9 14 Set Face Parameters DS K1T342 Series Face Recognition Terminal User Manual 148...
Page 205: ...UD25849B...
