If the person do not wear the hard hat when authenticating, the device will pop up a prompt
and the door will open.
Must Wear Hard Hat
If the person do not wear the hard hat when authenticating, the device will pop up a prompt
and the door will keep closed.
Face with Mask Detection
After enabling the face with mask detection, the system will recognize the captured face with
mask picture. You can set face with mask1:N matching threshold, it's ECO mode, and the
strategy.
None
The device will detect the face with mask without prompt.
Prompt and Open
If the person do not wear a face mask when authenticating, the device prompts a
notification and the door will open.
Prompt and Not Open Door
If the person do not wear a face mask when authenticating, the device prompts a
notification and the door keeps closed.
Fingerprint Security Level
Select the fingerprint security level.
The higher is the security level, the lower is the false acceptance rate (FAR).
The higher is the security level, the higher is the false rejection rate (FRR).
Set Recognition Area
Click Configuration → Smart → Area Configuration .
Drag the yellow frame in the live video to adjust the recognition area. Only the face within the area
can be recognized by the system.
Click Save to save the settings.
Click
or to record videos or capture pictures.
8.5.21 Set Notice Publication
You can set the screen saver and the sleep time for the device.
Click Configuration → Notice Publication .
Face Recognition Terminal User Manual
94
