10. Tap to save the settings.
7.3.5 View Password
Add a password for the user and the user can authenticate via the password.
Steps
1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in
the backend.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID. field and edit the employee ID.
Note
●
The employee ID should be less than 32 characters. And it can be a combination of lower
letters, upper letters, and numbers.
●
The employee ID should not be duplicated.
4. Tap the Name field and input the user name on the soft keyboard.
Note
●
Numbers, upper case letters, lower case letters, and special characters are allowed in the user
name.
●
The suggested user name should be within 32 characters.
5. Tap the Password to view the password.
Note
The password cannot be edited. It can only be applied by the platform.
6. Set the user role.
Administrator
The user is the administrator. Except for the normal attendance function, the user can also
enter the Home page to operate after authenticating the permission.
Normal User
The User is the normal user. The user can only authenticate or take attendance on the initial
page.
7. Tap to save the settings.
7.3.6 Set Authentication Mode
After adding the user's face picture, fingerprint, password, or other credentials, you should set the
authentication mode and the user can authenticate his/her identity via the configured
authentication mode.
Face Recognition Terminal User Manual
43
